DOMESTIC WATER PRESSURE
BOOSTER PUMP
The Grundfos CMB with PT is a compact booster pump designed for domestic and light commercial use. The booster unit consists of a Grundfos CM pump with stainless steel hydraulic components and a pressure tank. The CM pump is supplied with a pressure tank for even distribution of water pressure. When the water demand increases, there will be a pressure drop in the pipeline from the pre-set level. The pump automatically starts till it reaches pre-set cut-off pressure. The systems are available with 24 Lts & 60 Lts pressure tank
Applications
- Mains boosting
- Household water supply
- Boosting from above ground water tanks
CMB WITH PM1 BOOSTER PUMP
The Grundfos CMB with PM1 is a compact booster pump designed for domestic and light commercial use. The booster unit consists of a Grundfos CM pump with stainless steel hydraulic components and a PM1 Pressure Manager. The Pressure Manager allows the pump to start and stop automatically according to demand and protects the pump from drying up.
Applications
- Mains boosting
- Household water supply
- Boosting from above ground water tanks
CM TWIN
BOOSTER
The Grundfos CM Twin Booster set consists of two identical Grundfos CM pumps connected in parallel and mounted on a common base frame and a control cabinet incorporating motor protection and controller.
Applications
- Large houses
- Domestic buildings
- Cottages and villas
- Mid-size Hotels
- Mid-size Hospitals
- Schools
SCALA1
diagnostics. You can create and email reports on-site and access hard-to-reach installations remotely from the app.
Applications
- Taps and showers in the home
- Garden and lawn irrigation
- Greenhouses
- Water transfer
- Car wash
SCALA2
The Grundfos SCALA2 is a fully integrated water booster pump delivering perfect water pressure in all taps at all times – even with multiple taps and showers running at the same time. It packs a pump, motor, tank, sensor, drive and non-return valve into one compact unit. With its intelligent pump control, SCALA2 automatically adjusts performance to both inlet pressure and water consumption in the home. SCALA2 has a sound level of 47 dB (A) in typical use and thereby offers one of the lowest noise levels of any booster in the market.
Feature
- Perfect water pressure – in all taps at all times
- Easy installation and self-priming
- Low noise
- Energy efficient
- Compact
- Robust and reliable
CME BOOSTER
The Grundfos CME Booster is a compact, frequency (VFD) controlled booster system for a large variety of domestic and light commercial applications. The CME Booster ensures great comfort by providing constant pressure, regardless of variations in demand or inlet pressure. In addition, the CME Booster makes it possible to adjust the water pressure just by the touch of a button. Also, the CME Booster is very easy to install. Once the booster has been connected to the pipeline, it is simply a matter of putting the plug into a socket, and the system is operational.
Applications
- Large houses
- Domestic buildings
- Cottage and villas
- Mid-size Hotels
- Schools
CMBE TWIN BOOSTER
The Grundfos CMBE TWIN Booster is a compact two-pump booster system for water supply in domestic and light commercial applications that are easy to install and commission. The integrated speed controller allows the CMBE Booster to maintain constant pressure in the pipeline. A pressure sensor monitors the changes in water consumption and will signal the speed controller to change the motor speed.
Application
- Large houses
- Domestic buildings
- Cottage and villas
- Mid-size Hotels
- Compact
- Poly-house & Green House farming
UPA
The Grundfos UPA range is a compact domestic pressure booster, that makes the required water pressure available at tap, showers and other tapping points in residential buildings and private homes with ease. The new UPA range completes a full-line product offering (hot & cold water) for pressure booster.
Applications
- LDomestic boosting with inlet pressure (0.1 bar) for single shower, taps, gas
heaters and washing machines - Inlet boosting to the solar tank. Ideal for single bathroom application
without special shower gadgets Cottage and villas
SmART SUB
Grundfos SmART SUB Series, Single Phase and Three Phase Horizontal open well Submersible Pumps are designed for under water application, and therefore, there is no need for priming or a foot valve. These pumps are suitable for open wells or tanks where there are wide fluctuations in water level.
Application
- Sump to over head tank filling
- Farms
- Fountains
- Industrial and rural water supply
- Gardening
- Landscaping
Grundfos JP
The Grundfos JP is a self-priming, single-stage centrifugal jet pump ideal for transferring water from wells or ground tanks. It has an excellent suction capacity and is designed for long, trouble-free operation. The built-in ejector with guide vanes ensures optimum self-priming properties. JP is small and compact with a lifting handle that makes the pump handy and easy to carry
Applications
- Water transfers from tanks below and above the ground level
- For treated water transfer
Grundfos SB
The Grundfos SB pump is a submersible booster pump, designed for pumping clean water for domestic and rainwater applications. The SB pump is built of high-quality composite and stainless steel materials that are resistant to corrosion. The SB is ideal for operation in a well or ground tanks, as it easily prevents solid particles from entering the pump. The pump comes with float switch, which ensures the user a convenient experience with automatic start/stop operation and provides dry running protection. SB pumps are available with an integrated suction strainer.
Application
- Shallow wells
- Rainwater collection in underground tanks
- Boosting tanks
Grundfos SP
The Grundfos SP is a 4-inch multi-stage submersible pump, designed for operation in boreholes. SP is made of corrosion resistant stainless steel, offering high operating reliability regardless of the application. The SP offers high efficiency along with high resistance to sand and other abrasive particles.
Applications
- Water lifting from borewell
- Water transfer from ground tank
SQE
The Grundfos SQE is a small and compact submersible multi-stage pump. The motor of the SQE pump is a permanent magnet motor with a micro frequency converter ensuring optimum efficiency. The built-in frequency converter features protective functions and soft-starting, which reduces starting current and gives smooth and steady acceleration and dry running protection. The SQE pump is handy and user-friendly due to its low weight and 3-inch diameter.
Application
- Water lifting from borewell
- Water transfer from ground tank
- Submersible booster through external controller (CU301) from underground tanks and roof tanks
PRESSURE MANAGER PM RANGE
The Grundfos PM1 is suitable for applications where start/stop of the pump is needed, according to the consumption. It is a solution offering the booster to start at 1.5 or 2.2 bar. PM1 starts the ump when reaching the starting pressure, and keeps running as long as there is a flow. PM1 offers dry-running protection and cycling alarm for increased safety in addition to the usual Grundfos quality, which guarantees high flexibility, robust electronics, and long life.
PRESSURE TANK
(GT)
The GT pressure tanks for cold-water applications are long life tanks for both domestic and industrial applications. The GT tank ensures controlled pressure in your water supply. The result of this is better comfort in your installation by limiting the start/stop frequency of your pump, compensation for pressure drops and eliminating water hammer in pipework. GT tanks can be integrated in many different installations with a wide variety of pumps.
Application
- Wide range of GT tanks
- Approved for drinking water
- Reducing start/stop frequency
- Optimise comfort
COMFORT UP
The Grundfos COMFORT range is designed for re-circulation of domestic hot water in small family houses. The COMFORT PM range is a high efficiency choice with an energy usage of only 8 W. The intelligent COMFORT AUTOADAPT PM automatically adapts to the individual’s hot water consumption pattern in the household and only runs when hot water is needed.
Application
- Minimise water waste
- AUTOADAPT mode